毕琳琳,杨 倩,周暄宣,李 骅,赵 航,袁佳妮,王四旺.桂皮醛亚微乳注射剂中桂皮醛的含量测定研究[J].,2018,(5):972-975 |
桂皮醛亚微乳注射剂中桂皮醛的含量测定研究 |
Study on the Determination of Cinnamaldehyde in the Cinnamaldehyde Microemulsion Injection |
投稿时间:2017-10-10 修订日期:2017-11-17 |
DOI:10.13241/j.cnki.pmb.2018.05.039 |
中文关键词: 桂皮醛亚微乳 桂皮醛 HPLC法 含量测定 |
英文关键词: Cinnamaldehyde microemulsion Cinnamaldehyde HPLC Content determination |
基金项目:陕西省科技攻关基金项目(2016SF-067) |
|
摘要点击次数: 525 |
全文下载次数: 378 |
中文摘要: |
摘要 目的:建立桂皮醛亚微乳注射剂中桂皮醛含量的测定方法。方法:采用高效液相色谱法,按照固定相为色谱柱Diamonsil C18柱(250 mm×4.6 mm,5 μm);流动相为乙腈:0.5%冰乙酸水溶液(60:40),检测波长为288 nm,流速为1.0 mL?min-1,柱温为25 ℃,进样量为10 μL的进样条件,测定桂皮醛亚微乳注射剂中桂皮醛的含量。结果:桂皮醛在5~100 μg?mL-1浓度范围内呈良好的线性关系,标准曲线方程为Y=1703 X -1996(r2=0.999,n=6)。在低、中、高三个浓度下,一天内连续3次和连续3天测定样品,测定的RSD值均小于2.0 %,精密度良好。加速试验中,在温度30 ℃,相对湿度60 %的条件下放置6个月,样品测定结果与0天相比无变化。本实验中3批桂皮醛亚微乳注射剂中桂皮醛含量的均值为19.89 μg?mL-1,平均回收率为100.98 %,RSD为1.45 %。结论:本方法操作简便、快速准确,稳定性高,系统重现性良好可有效控制桂皮醛亚微乳注射剂中有效成分含量。 |
英文摘要: |
ABSTRACT Objective: To establish the method for determining the content of cinnamaldehyde in the cinnamaldehyde microemul- sion injection. Methods: Use HPLC method, with stationary phase of Diamonsil C18 column (250 mm×4.6 mm, 5 μm), mobile phase of acetonitrile-0.5% aqueous solution of glacial acetic acid (60:40), detection wavelength of 288 nm, flow rate of 1.0 mL?min-1, column temperature of 25 ℃, sample quantity of 10 μL, to determine the content of cinnamaldehyde in the cinnamaldehyde microemulsion in- jection. Results: The linear range of cinnamaldehyde is 5~100 μg?mL-1. The standard curve equation is Y=1703 X -1996 (r2= 0.999, n= 6). Precision is assess by analyzing quality-control samples at low, medium and high concentrations in three duplicates a day and in three consecutive days, respectively. The precision (as relative standard deviation, RSD) was less than 2.0%. It shows that the precision is good. The determination results are unchanged to 0 days at a temperature of 30 ℃ and relative humidity of 60% after 6 month. In this ex- periment, the average contents of cinnamaldehyde are 19.89 μg?mL-1, the average recovery rate is 100.98%, and RSD is 1.45%. Conclusion: The method is simple, accurate, reliable and reproducible, which can control the quality of cinnamaldehyde microemulsion injection effectively. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|