文章摘要
曹 阳,王 坤,戴太强,许方方,安 然,刘 斌.应用便携式数字化温控烫伤仪建立标准化大鼠皮肤烫伤模型[J].,2018,(12):2261-2267
应用便携式数字化温控烫伤仪建立标准化大鼠皮肤烫伤模型
Using a Portable Digitization Temperature controlled Scald Device to Establish the Standardized Rat Skin Scald Model
投稿时间:2018-02-07  修订日期:2018-03-15
DOI:10.13241/j.cnki.pmb.2018.12.013
中文关键词: 烫伤仪  便携式数字化  温控  大鼠
英文关键词: Scald device  Portable digitization  Temperature controlled  Rats
基金项目:军队十二五重点基金项目(BWS11J046)
作者单位E-mail
曹 阳 军事口腔医学国家重点实验室国家口腔疾病临床医学研究中心陕西省口腔疾病临床医学研究中心第四军医大学口腔医院口腔颌面外科 陕西 西安 710032 1552567431@qq.com 
王 坤 新疆军区总医院超声科 新疆 乌鲁木齐 830000  
戴太强 军事口腔医学国家重点实验室国家口腔疾病临床医学研究中心陕西省口腔疾病临床医学研究中心第四军医大学口腔医院口腔颌面外科 陕西 西安 710032  
许方方 军事口腔医学国家重点实验室国家口腔疾病临床医学研究中心陕西省口腔疾病临床医学研究中心第四军医大学口腔医院口腔颌面外科 陕西 西安 710032  
安 然 军事口腔医学国家重点实验室第四军医大学口腔医院实验动物中心 陕西 西安 710032  
刘 斌 军事口腔医学国家重点实验室第四军医大学口腔医院实验动物中心 陕西 西安 710032  
摘要点击次数: 480
全文下载次数: 251
中文摘要:
      摘要 目的:研制一种新型便携式数字化温控烫伤仪,通过自制数字化烫伤仪对大鼠进行烫伤实验,建立标准化大鼠皮肤烫伤模型,从而验证数字化烫伤仪的有效及实用性。方法:选取18只SD大鼠分为对照组(3只,不烫伤);实验组(15只),再将实验组大鼠随机分配为A组(6只)、B组(6只)、C组(3只),选取大鼠背部作为烫伤实验部位:1、时间设定为20 s和30 s,烫伤仪温度分别设定为70 ℃、80 ℃、90 ℃、100 ℃、120 ℃,对A组和B组大鼠进行烫伤处理。2、温度设定为100℃,烫伤仪加热时间分别设定为10 s、15 s、25 s,对C组大鼠进行烫伤处理。烫伤后48 h切取实验组和对照组大鼠背部皮肤,进行大体及显微镜下组织病理学观察。结果:70℃ 20s烫伤点为I°烫伤;70 ℃ 30 s、80 ℃ 20 s、100 ℃ 10 s烫伤点为浅Ⅱ°烫伤;80 ℃ 30 s和100 ℃ 15 s烫伤点为深Ⅱ°烫伤;90 ℃ 20 s、90 ℃ 30 s、100 ℃ 20 s烫伤点为Ⅲ°烫伤;100 ℃ 25 s、100 ℃ 30 s、120 ℃ 20 s、120 ℃ 30 s烫伤点为IV°烫伤。结论:新型便携式数字化温控烫伤仪,可以可靠的建立标准化大鼠皮肤烫伤模型。
英文摘要:
      ABSTRACT Objective: The aim of this study was to create a new type of portable digitization temperature controlled scald device, did experiment on rats to verify the effectiveness and practicability of the new device, therefore, researchers could establish the standard- ized rat skin scald model by it. Methods: 18 SD rats were selected in this experiment, then divided into control group (3 rats, not scalded) and experimental group (15 rats, scalded) randomly. The experimental group was divided into A group (6 rats), B group (6 rats) and C group (3 rats), the backs of all the experimental group rats were chosen as the scalded parts: 1. Set the scalded time at 20 s and 30 s, and the scalded temperature at 70 ℃, 80 ℃, 90 ℃, 100 ℃, 120 ℃, scalded the rats of A and B group separately. 2. Set the scalded tempera- ture at 100 ℃, the scalded time at 10 s, 15 s, 25 s, scalded the rats of C group separately. After 48h, the skins of the rats' backs from the experimental group and the control group were cut off and their histopathology was observed under a microscope. Results: The rats that scalded at 70 ℃ for 20 s were scalded in degree I°; the rats that scalded at 80 ℃ for 20 s、100 ℃ for 10 s were scalded in superficial de- gree II°; the rats that scalded at 80 ℃ for 30 s, 100 ℃ for 15 s were scalded in deep degree II°; the rats that scalded at 90 ℃ for 20 s, 90 ℃ for 30 s, 100 ℃ for 20 s were scalded in deep degree III°; the rats that scalded at 100 ℃ for 25 s, 100 ℃ for 30 s, 120 ℃ for 20 s, 120 ℃ for 30 s were scalded in deep degree IV°. Conclusion: The new portable digitization temperature controlled scald device was a reliable device to establish the standardized rat skin scald model.
查看全文   查看/发表评论  下载PDF阅读器
关闭