| 陈峡胡祥上杨懿农王媚黄讯肖自强李志强饶利兵△.多点插管法制作上肢离体铸型标本[J].,2012,12(6):1126-1128 |
| 多点插管法制作上肢离体铸型标本 |
| Multipoint Intubation Makes Casting Mold of SeparationUpper Limb |
| |
| DOI： |
| 中文关键词: 上肢 插管 铸型 |
| 英文关键词: Upper limb Intubation Casting mold |
| 基金项目: |
|
| 摘要点击次数: 949 |
| 全文下载次数: 1209 |
| 中文摘要: |
| 目的：研究显示上肢动脉铸型标本方法，为临床应用及教科研提供直观细致的局部循环标本。方法：截取新鲜成人尸上肢6
例，从腋动脉、尺动脉及桡动脉分别向肢体两端进行多点灌注牙托粉、过氯乙烯等填充剂，然后进行腐蚀冲洗处理。结果：上肢动
脉铸型标本外形美观，具有结构完整性和连续性，血管分支毗邻关系明确，疏密有度。结论：采用沿动脉管道多点插管灌注法是制
作上肢动脉铸型标本较为有效的方法。 |
| 英文摘要: |
| Objective: To research method of casting mold of upper limb artery, providing audio-visual and careful part circulate
sample for clinical practice and research. Methods: Cut out six upper limbs from adult corpse, multipoint pouring into Filler from axillary
artery, ulnar artery and radial artery, then corrode and wash. Results: The casting mold of upper limb artery is artistic with structural integrity
and continuity. Adjoin relation of vessel branch is clear and definite. Conclusion: Multipoint intubation is an effective method to
make casting mold of upper limb artery. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
